SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklifts
Used Forklift Parts - In due course, forklift components will wear and must be replaced. Acquiring brand new parts could become a costly venture so one more idea is to obtain used forklift parts. This could save much cash in the end. It is a good idea to acquire used lift truck components that have been reproduced. These components would ensure that you are getting components which would work for a long time and be productive.
Worn or broken parts that are remanufactured are a very cost effective answer than rebuilding. With rebuilding parts, just the parts that are broken or worn out get replaced, which means that other wearable parts can break down soon after acquisition.
Remanufacturing on the other hand provides the best assurance for used parts. Remanufactured components are taken apart and cleaned and then all wearable pieces are replaced. All wearable parts are replaced regardless of age or wear which is one more rationale why reproduced components in general run so much better. Whatever part within the part is new and this provides much longer life to the used part. Depending on the lift truck parts that are being redone, the cleaning process and the whole remanufacturing process would vary.
After complete disassembly, the engines are oven cleaned. Several parts of the engine like for example rings, pistons, spark plugs, filters, valves, and valve springs could be replaced during the remanufacture process. The engines are hot tested after reassembly to ensure that there are no leaks, no noises, no oil pressure problems or any vacuum.
Transmissions are another item that is oven cleaned after being disassembled. The transmission is then washed. A thorough inspection is performed to be able to check for any cracks. Seals, bearings and bushings are all replaced. Usually, the replacement components used on transmission components meet OEM specifications.
Some parts such as the alternator, the water pump, torque converters, the starter and steer axles could acquire longer serviceability after being reproduced and having all wearable parts replaced. The electronic control in the electric lift truck is maintained by the control card. This card could also be remanufactured with replacing all aged and worn out components. Not like various lift truck components the control card could only have the worn and aged components replaced.
Parts that are reproduced have to be comprehensively examined upon reassembly to guarantee they are in good condition previous to being sold. When acquiring these parts, it is a good idea to be certain that they have undergone all of the proper testing and inspections. On certain larger components like for example engines, transmissions and steer axles, OEM specification replacement components must be used.
The dealer of used lift trucks and parts could guarantee that the remanufactured parts have met OEM specifications and that these parts meet industry standards. A lot of details go into remanufacturing used components. This attention to detail provides more serviceability out of reproduced components than the components that were only rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
forkliftpartsnorthwestterritories.com
Email Us
About Us